TelCustomer Helpline
Can't find what you are looking for?
Call: 01275 871 720

Guide to Fitting Plaques, Nameplates and Labels

A full guide to fitting your nameplates, plaques and labels which are supplied by Brunel Engraving Company. We hope this helps any issues you may have when fitting your products. 

 

Fitting Plaques, Nameplates and Labels:

 

Brunel Engraving Company offers different options for fitting your signs, these include Screw fixing, Self-adhesive fixing and self-fix (no fixings supplied)

 

NB. The following instructions are for general guidance, types of wall/door vary considerably and we cannot provide detailed instructions for all situations. If further assistance is required please contact the sales team on 01275 871720

 

Screw fixing

When choosing this option we supply a standard length screw dependant on size of sign. Wall plugs are also included with plaques 8” x 6” and above.

 

Fitting Place the sign in your chosen position and mark the fixing positions through the screw holes with a pencil. Drill each fixing position with a pilot hole, reposition the sign and screw fix to the door/wall.

 

When fitting plaques of 8” x 6” or above place the sign in your chosen position and mark the fixing positions through the screw holes with a pencil. Drill each fixing position with a suitably sized drill that will take the wall plugs, reposition the sign and screw fix to the door/wall.

 

Self-adhesive fixing

With this option we supply a high grip exterior grade self-adhesive tape, this is suitable for fixing to most flat, smooth surfaces providing that they are properly cleaned and free from oil or dust.

 

Fitting: place the sign in your chosen position and mark that position with a post-it-note or similar, that will not mark the surface, as a positioning guide. Clean the surface thoroughly where the sign is to be positioned with a non-oil based substance such as methylated spirit. Allow this to dry fully, remove the adhesive covering paper, do not touch the adhesive and position the sign to the marked guides and push hard onto the accepting surface.

 

Self-fixing

We cannot offer any specific guidance as situations vary greatly.

If assistance is required please contact the sales team on 01275 871720

 

 

Posted by: Brunel Engraving